DKD Laboratory and DAkkS Calibration
esz AG calibration & metrology is among Europe's leading calibration laboratories. The vast number of DIN EN ISO/ IEC 17025 accredited fields and quantities confirm esz AG's versatility and leading role.
esz AG' scope of services is enormous. As matter of fact it is a lot easier to name and number non-accredited fields and quantities.
All laboratories, calibration & test equipment and corresponding measurement results are unevidable tied and traceable to national and international primary standards - traceability guaranteed.
DAkkS Accreditation No. D-K-15019-01
German accreditation body DAkkS periodically confirms esz AG's competence and capabilities as an accredited, stationary as well as on-site calibration laboratory in compliance with DIN EN ISO/IEC 17025:2018. esz AG' is accredited for the following metrological fields:
Electrical Quantities DC and lower frequencies AC-/ DC-current *) AC-/ DC-voltage *) High voltage DC-resistance *) AC-resistance *) Electrical charge Power *) Inductivity *) Capacity *) Time and Frequency Time interval *) Frequency and rotational frequency *) Fiber Optics Radiometric Measurements *) Photometric Measurements *) Dimensional Quantities Lenght Thread Diameter Gauge Blocks Handheld instruments Line standards, distances Dimensional quantities *) Angle Inclination Mass Flow Flow in gases *)
Electrical RF-Quantities RF-voltage RF-current Impedance (amplitude reflection factor) *) RF-power *) Attenuation *) Pulse related measurements *) Oscilloscope measurements *) Rise time *) Bandwidth *) Thermodynamic Quantities Temperature Measurements Resistance thermometer *) Thermocouple *) Thermometer and temperature simulation *) Climate chambers *) Block calibrators *) Humidity measurements Humidity and dew-point temperature *) Climate chambers *) Mechanical Quantities Pressure *) Force Torque Balance Mass Measuring instruments in automotive industry (brake testers) Roller brake tester *) Plate brake tester *) Headlight tester *) Emission tester for spark-ignition engines *) Emission tester for compression-ignition engines *) *) available on-site
Deutscher Kalibrierdienst (DKD). Certified Quality.
Reliability emerges from esz AG calibration & metrology. esz AG calibration & metrology's initial accreditaion goes back to the year 1997, when German Accreditation Body (formerly known as DKD's Accreditation Body at the Physikalische Technische Bundesanstalt - PTB) recognized esz AG calibration & metrology as an accredited calibration laboratory under registration number DAkkS D-K-15019-01-00 (former accreditation number DKD-K-18201). Ever since esz AG is officially entitled to issue DAkkS-accredited DKD-calibration reports in compliance with DIN EN ISO/ IEC 17025. DKD is an association of calibration laboratories, industry, research institutes, technological authoritites, controlling and testing institutes under the patronage of Physikalisch Technische Bundesanstalt (PTB), audited, monitored and accredited by DAkkS. DKD and their affiliated committees and laboratories form the expertise and tie industrial measuring to PTB's core responsibilty, i.e. to trace, control and pass measurement units down to authorities, industry and public within Germany.
esz AG a solid base for Quality Management
esz AG performs accredited calibration for test and measurment equipment, test stations and test systems for all accredited fields and quantities. All DAkkS-/ DKD-calibration reports are a certification of traceability to national and international standards, as required and part of norms, guidelines and regulatory framework for instance DIN EN ISO 9001 or DIN EN ISO/ IEC 17025.
Accredited DAkkS/ DKD calibration intend to certify quality and reliability of one's test and measurement results, increase the level of trust among customers, strenghten the power to compete on domestic and global markets. They provide the metrological principle for successful test and measurement equipment management as part of present-day quality management.